• 雙向測量原理不受壓力、密度、溫度和粘度的限制

• 水行業基本應用場合：可用于狹小空間測量和塑料管道測量

儀表特性

• 安裝開檔尺寸短，儀表自重輕

• 帶不銹鋼接地環

• 取得國際飲用水測量認證

• 變送器外殼采用聚碳酸酯或鋁材

• WLAN 連接

• 內置數據記錄儀：用于測量值監測

  特征和規格

  測量原理電磁開關產品標題Flowmeter designed as compact wafer version with a state‐of‐ he‐art transmitter for Water & Wastewater. For basic water applications; optimized for limited space and plastic pipe installations.
  傳感器特點Easy, fast centering of the sensor – innovative housing construction. Energy‐saving flow measurement – no pressure loss due to crosssection constriction. Maintenance‐free – no moving parts. Short installation length and low weight. Integrated ground disks made of stainless steel.
  變送器特點Safe operation – no need to open the device due to display with touch control, background lighting. Time‐saving local operation without additional software and hardware – integrated web server. Integrated verification – Heartbeat Technology. Transmitter housing made of durable polycarbonate or aluminium. WLAN access.
  公稱口徑范圍DN 25...100
  1"...4"
  接液部件材質Liner: Polyamide 
  Electrodes: 1.4435 (316L)
  測量變量Volume flow, mass flow
  *大測量誤差Volume flow: ±0.5 % o.r. ± 1 mm/s (0.04 in/s)
  測量范圍9 to 4700 dm³/min (2.5 to 1250 gal/min)
  *大過程壓力PN 16, Class 150, 10K
  介質溫度范圍0 to +60 °C (+32 to +140 °F)
  環境溫度范圍–20 to +60 °C (–4 to +140 °F)
  傳感器外殼材質AlSi10Mg, coated 
  Sensor connection housing: AlSi10Mg, coated
  變送器外殼材質Polycarbonat; AlSi10Mg, coated
  防護等級Compact version: IP66/67, type 4X enclosure 
  Sensor remote version: IP66/67, type 4X enclosure 
  Transmitter remote version: IP66/67, Type 4X enclosure
  顯示/操作4‐line backlit display with touch control (operation from outside) 
  Configuration via local display, web browser and operating tools possible
  輸出3 ouputs: 
  0‐20 mA/4‐20 mA HART (active) 
  Pulse/frequency/switch output (passive) 
  Pulse/frequency output (passive) 
  Switch output (passive) 
  輸入Status input
  數字式通信HART, PROFIBUS DP, EtherNet/IP, Modbus RS485
  電源AC 100 to 240 V / AC/DC 24 V
  危險區認證cCSAus
  產品安全性CE, C-tick, EAC marking
  計量認證和證書Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR 
  壓力認證和證書CRN
  衛生型認證和證書ACS, KTW/W270, NSF 61, WRAS BS 6920